Vertical reach: 39.2 m / 128 ft 7 in
Horizontal reach: 35.2 m / 115 ft 6 in
Rated output · rod side: 160 m3/hr / 209 yd3/hr

Cab-over (short-nose) chassis

DRAWING

Pending — drawing to be provided.

Official drawing showing dimensions, wheelbase, total weight and weight distribution for each axle.

Conventional (long-nose) chassis

DRAWING

FULL MODEL DATA

Full specifications.

Pending — the cab-over chassis specification and fields not stated for the conventional chassis are still required.

Search specifications

All 54 fields shown.

Supplied pump specifications

Source: HR40-5RZ Specification.xlsx · worksheet “HR40-5RZ SPECIFICATION” · A1:I40

Swipe horizontally to view all columns.

HR40-5RZ supplied sheet values
Specification	Metric	Imperial
Boom
Number of Booms	5
Folding Type	RZ
Maximum Vertical Reach	39.2 m	128 ft 7 in
Maximum Horizontal Reach	35.2 m	115 ft 6 in
Unfolding Height	8.3 m	27 ft 3 in
General
Delivery Pipe Size (Inner Diameter)	125 mm	5 in
Rotation	370 ˚
End Hose Length	3 m (4 m)	9 ft 10 in (13 ft 1 in)
End Hose Size (Inner Diameter)	125 mm	5 in
Outrigger Spread (Front)	6,300 mm	20 ft 8 in
Outrigger Spread (Rear)	8,600 mm	29 ft 2 in
Hydraulics
Output (Rod Side)	160 m3/hr	209 yd3/hr
Output (Piston Side)	100 m3/hr	131 yd3/hr
Pressure (Rod Side)	70 bar	1,015 psi
Pressure (Piston Side)	112 bar	1,624 psi
Concrete Cylinder Size (Inner Diameter)	230 mm	9 in
Stroke Length	2,100 mm	83 in
Drive Cylinder Size (Inner Diameter)	130 mm	5 in
Rod Size	80 mm	3 in
Number of Strokes (Rod Side)	30 / min
Number of Strokes (Piston Side)	19 / min
Hopper Capacity	600 ℓ	159 G
Hydraulic System	Open-loop
Hydraulic System Pressure	350 bar	5,076 psi
S-Valve	D230 x D180 (S2318)
Main Pump	A11VLO260 (Rexroth)
Water Tank	400 ℓ	106 G
Water Pump Pressure	20 bar	290 psi

※ All technical data are theoretical values, and specifications are subject to change without prior notice due to continuous product improvement.

Values and units are reproduced from the source document without calculations or conversions.

These pump values do not establish chassis applicability. The conventional long-nose chassis data below is transcribed separately from the MACK Granite 64BR SDD source drawing; the cab-over chassis remains pending.

Chassis specifications

HR40-5RZ specifications
Cab-over (short-nose) chassis
Pending — specification must be provided.
Chassis manufacturer and model	Pending — information to be provided.
Axle configuration	Pending — information to be provided.
Wheelbase and axle spacing	Pending — information to be provided.
Transport length	Pending — information to be provided.
Transport width	Pending — information to be provided.
Transport height	Pending — information to be provided.
Chassis-only weight distribution	Pending — information to be provided.
X-unit weight	Pending — information to be provided.
Total vehicle weight and loading condition	Pending — information to be provided.
Front axle load	Pending — information to be provided.
Rear axle / axle-group loads	Pending — information to be provided.
Weight distribution for each axle	Pending — information to be provided.
Maximum permissible axle weights	Pending — information to be provided.

Swipe horizontally to compare both wheelbases.

HR40-5RZ conventional long-nose chassis comparison
Conventional (long-nose) chassis
Specification	WB 6,930 mm	WB 7,550 mm
Approved source	MACK Granite 64BR SDD drawing, page 1	MACK Granite 64BR SDD drawing, page 1
Chassis manufacturer and model	MACK Granite 64BR	MACK Granite 64BR
Axle configuration	SDD - Steer (1); Drive (2-3)	SDD - Steer (1); Drive (2-3)
Wheelbase and axle spacing	6,930 mm / 22 ft 8.8 in wheelbase; 1,270 mm / 4 ft 2.0 in drive-axle spacing	7,550 mm / 24 ft 9.2 in wheelbase; 1,270 mm / 4 ft 2.0 in drive-axle spacing
Transport length	12,276 mm / 40 ft 3.3 in	12,896 mm / 42 ft 3.7 in
Transport width	Pending — information to be provided.	Pending — information to be provided.
Transport height	3,980 mm / 13 ft 0.7 in	Pending — information to be provided.
Chassis-only weight distribution	Steer (1): 4,574 kg / 10,084 lb; combined drive group: 3,595 kg / 7,926 lb; total: 8,169 kg / 18,010 lb	Steer (1): 4,574 kg / 10,084 lb; combined drive group: 3,595 kg / 7,926 lb; total: 8,169 kg / 18,010 lb
X-unit weight	18,000 kg / 39,683 lb	18,800 kg / 41,447 lb
Total vehicle weight and loading condition	Calculated curb: 26,169 kg / 57,693 lb; calculated gross: 26,769 kg / 59,016 lb (people: 200 kg / 441 lb; water: 400 L / 882 lb)	Calculated curb: 26,969 kg / 59,456 lb; calculated gross: 27,169 kg / 59,897 lb (people: 200 kg / 441 lb)
Front axle load	Calculated steer - curb: 8,655 kg / 19,081 lb; gross: 8,783 kg / 19,375 lb	Calculated steer - curb: 9,884 kg / 21,790 lb; gross: 10,055 kg / 22,167 lb
Rear axle / axle-group loads	Calculated drive group (axles 2-3) - curb: 17,514 kg / 38,612 lb; gross: 17,986 kg / 39,625 lb	Calculated drive group (axles 2-3) - curb: 17,085 kg / 37,666 lb; gross: 17,114 kg / 37,730 lb
Weight distribution for each axle	Steer and combined drive-group values are listed above; individual drive-axle loads are not specified and the Actual rows are blank.	Steer and combined drive-group values are listed above; individual drive-axle loads are not specified and the Actual rows are blank.
Maximum permissible axle weights	Front: 9,072 kg / 20,000 lb; rear group: 20,866 kg / 46,002 lb	Front: 9,072 kg / 20,000 lb; rear group: 20,866 kg / 46,002 lb

Conventional long-nose chassis values are copied from the approved source drawing. Source conflict: the metric heading identifies the drive group as axles 2-3, while the imperial heading identifies it as axles 3-4. The source provides only the combined group load, not individual axle loads. Pending fields are not stated in the source, and no chassis data is inferred from the pump specifications.

MACHINE OVERVIEW